Liberty

Liberty

6/27/18 - MM, along with PB, made final changes to verify map was correct, printed map one more time and saved as pdf.  Assigned OFR 2018-02.  WE'RE DONE!!!

6/26/18 - MM pasted new circular logo into layout.  MM made final printout and awaits approval for map.  PB is researching best way to create GeoPDF.

6/25/18 - MM added new Statemap text, per PB request.

6/21/18 - MM made minor text adjustments to order of ma years and switched order of Samson and Pollock in layout.  MM also switched order of stereonets of bedding and foliation.  MM printed map for PB final review.

6/15/18 - MM corrected edits from PB and printed the map.

6/1/18 - MM had previously printed out map for PB to edit and PB gave map to KT for review.  KT found 9 errors and MM corrected the errors.  MM then printed the map.

5/14/18 - MM modified Correlation Diagram to match size of polygon blocks and text of Siler City.  Now the scale of the diagram is 1:12000.  MM shrunk the layout to eliminate some dead space.  MM added Superseded text at bottom of map.

5/11/18 - MM took feature classes OtherLines_CSA_Liberty_2018_Edits and ContactsAndFaults_CSA_Liberty_2018_edits from T drive, per PB's request and added them to CSA Data View.  MM used these two feature classes to replace old polylines and used ContactsAndFaults to create new polygonal layer - MapUnitPolys_CSA_Liberty_2018.

4/27/18 - MM printed the map.

4/26/18 - MM made corrections to map, per PB edits, including widening of the layout and the increase of the Correlation Diagram.

4/20/18 - MM printed map for PB.

4/3/18 - MM corrected edits made by PB to map.

3/2/18 - MM added Symbol column and SM_CODE column to 2018 Orientation Points feature class and then populated those columns.  MM then merged 2018 Orientation Points with 2016 version.  MM then began to move dip numbers around 2018 symbols.

2/28/18 - MM finished rest of text in layout.  MM finished CSA.  MM slightly rearranged layout to make it a little thinner.

2/27/18 - MM fixed the correlation diagram to match PB's new 2018 version.  MM is fixing the description text in layout.

2/26/18 - MM added CSA files to .mxd.  MM did topology on CSA contacts.  MM repaired CSA contact nodes.  MM cleared DISTRIBUTABLE.mxd of pre-2018 files, except ObservationPoints.  MM brought in Traverses_2018 and clipped them to quad box.  MM brought stereonets into layout.  MM brought in new text and descriptions.  MM began to work on Correlation Diagram.

2/20/18 - MM created 2018 polygon annotation feature class.  MM copied Qal_polylines_2018 to contacts_Liberty_2018 feature class.  MM deleted 2016 feature classes.

2/14/18 - MM moved contact boundaries to Liberty_quad boundary.  MM then created MapUnitPolys_2018_Liberty feature class.  MM then closed nodes for Qal_polylines_2018.  MM then created OverlayPolys_2018_Liberty feature class.

2/12/18 - MM brought Liberty_2018 from PB on T drive into geodatabase on C drive.  MM will supersede 2016 data with 2018 data.  MM created topology for 2018 contacts and corrected errors in this layer.  MM will match 2018 bounding box for contacts with Liberty_quad boundary tomorrow and match the ends of the 2018 contacts with this boundary, before creating polygons.

5/12/16 - MM redid longitude/latitude coordinates in corners of quad. 

5/12/16 - MM confirmed with topology and with viewing the feature classes that the linework (now ContactsAndFaults) and the polygons (now OverlayPolys) are clean.  MM will get with PB about one location that might be drawn incorrectly.

5/11/16 - MM created new box with NCGS information and placed in layout.

5/6/16 - MM added Qal lines (OverlayPolys) from Qal_polylines_Siler_city_area (a zip file from PB) to the feature dataset.  MM connected the nodes from the linework and ran topology (successful).  MM converted linework into OverlayPolys2 feature class.

5/4/16 - MM spliced the hydro layer, turned it into a GeoTIFF and added to .mxd.

5/3/16 - MM started and completed conversion of NC_Liberty_20130501_TM_geo_for_Export into a GeoTIFF.  This was loaded into the new Liberty_PRODUCTION.mxd.

5/2/16 - MM created the Liberty folder and also created the DISTRIBUTABLE and PRODUCTION folders within the Liberty folder.  MM copied NC_Liberty_20130501_TM_geo and NC_Liberty_20130501_TM_geo_for_Export from the T drive from PB.

6/5/16 (Sunday) - MM loaded Liberty_2016.shp and modified attribute table to add SM_CODE and Symbol columns.  MM then saved this as ObservationPoints_Liberty.  MM then formatted the symbols and arranged them (as well as the dip numbers) to maximize visibility.

6/10/16 - MM brought in rock unit descriptions from PB and added symbols to the legend.  MM also added text to the bottom right box. 

6/16/16 - MM received email from HH and downloaded SCI_CCR_LIB_COL data into the Statemap_Chapel_Hill_100k folder.  MM then clipped out Liberty data and began to symbolize it.  MM added Correlation Diagram to Data View.  MM changed folds to magenta and disregarded HH symbols and placed individual anticline and syncline symbols on folds.  MM loaded Correlation Diagram polylines and polygons from SCI_CCR_LIB_COL data and symbolized them in their MapView.  MM added this to the layout.

6/25/16 (Saturday) - MM printed map, made edits to the map and reconfigured map to match SilerCity NE. 

6/26/16 - MM printed map for PB's review.

6/27/16 - MM added NC logo.  MM added Traverse map with LiDAR.

6/28/16 - MM printed map for KBT's review. 

6/29/16 - MM edited KBT corrections and printed final map.

WE'RE DONE!