Coleridge

Coleridge

7/6/18 - MM, after transferring the D drive folder to now become the C drive folder, then transferred this .mxd from being based on the H drive to being based on the C drive.

6/27/18 - MM, along with PB, made final changes to verify map was correct, printed map one more time and saved as pdf.  Assigned OFR 2018-03.  WE'RE DONE!!!

6/26/18 - MM pasted new circular logo into layout.  MM made final printout and awaits approval for map.  PB is researching best way to create GeoPDF.

6/25/18 - MM added new Statemap text, per PB request.

6/20/18 - MM made minor text adjustments to order of ma years and switched order of Samson and Pollock in layout.  MM also switched order of stereonets of bedding and foliation.  MM printed map for PB final review.

6/5/18 - MM made final corrections to PB edits and printed map.

6/1/18 - MM previously printed a map for PB to review.  PB gave map to KT for his review.  KT found 9 edits that needed to be made and MM made the corrections.  MM then printed the map.

5/25/18 - PB completed a third version of CSA OtherLines and polylines.  MM added them to CSA Data View.  MM then used to polylines layer to create a version 3 of the polygon layer.  All three feature classes were properly symbolized.

5/17/18 - MM added bold text to rock descriptions in layout.

5/16/18 - MM added latest traverse additions from BP to Traverse_Coleridge_2017_2018.  MM carved two new Za polygons from inside of Zav1 polygon.  MM made changes to two points by adding two Rhodolite Rose boxes denoting quartz diorite porphyry underneath the joint symbols.

5/9/18 - MM made corrections to his own edits, which included adding a few symbols to the layout, adding Jd labels to diabase contacts on the quad, adding a title to the stereoscopes and making minor edits to the Correlation Diagram.  MM then printed the map.

5/8/18 - MM added 54 stations from PB_BT_Station_data_2017_Coleridge and added them to ObservationPoints.  MM symbolized the new points, including new diabase stations.  MM then printed map and marked up the copy, awaiting more edits.

5/3/18 - MM and PB made some edits to the map, including the addition of version 2 polylines and other lines.  The polylines were used to create a version 2 polygons layer.

4/27/18 - MM printed the map.

4/22/18 (Sunday) - MM added miscellaneous text to layout.  MM added a couple of references.  MM enlarged the size of Correlation Diagram.

4/20/18 - MM added new map unit description text to the layout from BP.  MM also symbolized diabase points.

4/15/18 (Sunday) - MM arranged dip numbers and symbols.  MM added A and A' cross section labels to the map.  MM added external rock unit labels to the map.

4/7/18 (Saturday) - MM redid Correlation Diagram, per BP's powerpoint drawing.  MM added stereoscopes to layout.  MM made minor additions to References in layout.  MM made some corrections to CSA and standardized the polygons.

4/6/18 - MM brought in 2018 data to layout.  MM standardized all polygon colors but one.  (Will ask PB later.)  MM created CSA Map View and brought in all the data.

4/5/18 - MM brought Coleridge_2018 data from BP on the T drive to the C drive in the Coleridge_PRODUCTION folder.

4/4/18 - MM added a couple of references to layout.

Completed OFR 2016-11 - Coleridge NE Corner

6/29/16 - MM made final corrections from KBT and printed final map.

6/28/16 - MM printed map for KBT review.

6/27/16 - MM made edits per PB, added NC logo in lower left corner of layout and added Traverse map with LiDAR in lower right corner of layout.

6/25/16 (Saturday) - MM rearranged layout to match Siler City NE.  MM added quartz symbols to map.  MM printed map for review by PB.

6/14/16 - MM labelled Qal polygons, added contact lines to the legend and shrunk the layout by rearranging some of the items.

6/13/16 - MM added dip numbers to symbols in layout.  MM received email from HH and downloaded SCI_CCR_LIB_COL data into the Statemap_Chapel_Hill_100k folder.  MM then clipped out Coleridge data and began to symbolize it.  MM added Correlation Diagram to Data View.  MM changed folds to magenta and disregarded HH symbols and placed individual anticline and syncline symbols on folds.

6/10/16 - MM loaded rock unit descriptions from PB into layout.  MM also loaded symbols into legend and made additions to the text box in the lower right.
6/5/16 (Sunday) - MM loaded Coleridge_2016.shp and modified attribute table to add SM_CODE and Symbol columns.  MM then saved this as ObservationPoints_Coleridge.  MM then formatted the symbols and arranged them (as well as the dip numbers) to maximize visibility.

5/12/16 - MM confirmed with topology and with viewing the feature classes that the linework (now ContactsAndFaults) and the polygons (now OverlayPolys) are clean.

5/11/16 - MM created new box with NCGS information and placed in layout. MM, while checking Qal linework, noticed a loop in the contact.  MM will have to redo contact in that area, redo the polygons and double-check the Crutchfield X and Liberty quads to make sure the linework is correct.

5/6/16 - MM added Qal lines (OverlayPolys) from Qal_polylines_Siler_city_area (a zip file from PB) to the feature dataset. MM connected the nodes from the linework and ran topology (successful).  MM converted linework into OverlayPolys2 feature class.

5/4/16 - MM spliced the hydro layer, turned it into a GeoTIFF and added to .mxd.  MM darkened the contours to RGB 174, 133, 114 on the FullQuad GeoTIFF.

5/3/16 - MM started and completed turning NC_Coleridge_20130501_TM_geo_for_Export into a GeoTIFF and loaded it into the new Coleridge_PRODUCTION.mxd.

5/2/16 - MM created the Coleridge folder and also created the DISTRIBUTABLE and PRODUCTION folders within the Coleridge folder.  MM copied NC_Coleridge_20130501_TM_geo and NC_Coleridge_20130501_TM_geo_for_Export from the T drive from PB.